How Much Water Does a Fire Sprinkler Release?

A single fire sprinkler head discharges 15 to 25 gallons of water per minute. A typical accidental activation lasting 10 minutes releases 150 to 250 gallons — enough to damage the immediate area significantly and potentially water to travel to floors below. Commercial sprinkler systems connected to a main line can continue discharging until the system is shut off.

Immediate Response to Sprinkler Activation

  1. Evacuate the area if the activation was caused by a fire — determine if there is an active fire emergency first
  2. Locate and shut off the sprinkler system control valve — typically in the mechanical room, near the main water supply entry, or in a dedicated fire sprinkler room
  3. Call your building management company or fire alarm monitoring service to cancel the fire department response if applicable
  4. Document damage immediately with photos and video
  5. Call your insurance company and a water damage restoration company simultaneously

Restoration After Sprinkler Discharge

Sprinkler water is typically considered Category 1 (clean) or Category 2 (gray) water depending on the age and condition of the system. Commercial sprinkler system water is often Category 2 due to sitting in pipes. Restoration involves immediate extraction and drying, removal of saturated ceiling tiles and drywall, protection or removal of electronic equipment, and documentation of all contents damage for insurance purposes.

Find Local Help

Browse all cities →

WaterDamageSource is an educational resource. Always consult a licensed professional for guidance specific to your situation.

Get Restoration Information

Tell us about the damage and we'll connect you with a qualified restoration company serving your area.